Search the site

SAP Renovation

Warranty certificate

A three-year warranty on the workmanship and materials used in the restoration.

1. Introduction

By choosing SAP you choose world-class craftsmanship and materials, the fruit of which is beauty and the best possible performance of your instrument.

2. Terms of our warranty

SAP Renovation provides a three-year warranty on the workmanship and materials used in restoring or rebuilding your instrument. The warranty can be extended for a further two years for a fee, by contacting our sales department. During this period SAP Renovation is responsible for remedying defects that arise despite proper use of the instrument, by repairing or replacing the parts concerned, without charging the owner for labour or materials. All warranty work will be carried out at the SAP Renovation factory; any exception to this rule is agreed with the client. Where justified, SAP Renovation will send a trained technician to repair the defect at the client’s premises. The repair may also be carried out by persons or firms operating in the client’s area, designated by SAP Renovation.

3. Limitations of the warranty

The restoration warranty provided by SAP Renovation does not cover damage, defects or accidental loss of the instrument resulting from:

A) improper use, negligence, mishandling of the instrument or unsuitable positioning of the instrument;

B) unprofessional transport of the instrument;

C) any attempt by the owner to repair defects, or unsuccessful attempts at servicing by third parties without the knowledge of SAP Renovation;

D) exposure of the instrument to extreme temperatures or weather conditions, as well as damage caused by sun or water;

E) use outdoors;

F) attempts at tuning or regulating the action by persons without the appropriate qualifications.

SAP Renovation accepts no responsibility for irregularities in the functioning of the instrument that can be eliminated by regulation, tuning or voicing.

Tuning, regulation of the action and keyboard, and regulation of the pedal mechanism arising from normal use of the instrument are not covered by the warranty.

Furthermore, all servicing and tuning should always be carried out by professionals.

After restoration the instrument should be thoroughly checked immediately on delivery. To preserve your warranty rights, any reservations about the restoration must be reported to SAP Renovation by e-mail within 7 days of delivery of the instrument

4. Good practice in use and maintenance

We have a few suggestions on how to use the instrument so that you can enjoy it for a long time. Most importantly, the instrument must never be exposed to extreme temperatures or humidity. It must not be placed close to any source of heat. We therefore recommend positioning it away from central-heating radiators and away from windows. The right place for the instrument is away from outside walls and closer to inside walls, which are less subject to temperature fluctuations during a harsh winter or a hot summer. The optimum recommended conditions are therefore a constant humidity of between 40 and 65% and a temperature of about 20 °C. If a constant humidity level cannot be ensured, we advise fitting the instrument with a humidity control device; many such devices are available on the market. Another important rule is to avoid direct sunlight. Prolonged exposure to the sun’s rays will result in blemishes on the veneer and discolouration of the wood or finish. It is equally important not to use standard dusting products: some may contain chemicals that can irreversibly damage the case.

5. Servicing

However intensively the instrument is used, it should be tuned and have its action, keyboard and pedal mechanism regulated at least twice a year.

This helps keep the instrument’s tuning stable at 442 Hz.

6. Notes

This applies to restorations in which we repair the soundboard but do not restore the case parts or make new bridge caps. SAP Renovation Sp. z o.o. accepts no liability for any cracks in the veneer and/or lacquer on the case of the instrument or on the bridge caps. Damage of this kind can occur spontaneously during the slow drying of the soundboard, as a result of changes in temperature and humidity.

We suggest that when you commission a restoration whose scope:

A) does not include restoration of the case parts, items such as the grand piano lids, the music desk and the upper and lower panels of an upright piano remain with the client;

B) does not include restoration of the case parts or restoration and/or regulation of the action and dampers, items such as the grand piano lids, the music desk, the lyre, the legs and the upper and lower panels of an upright piano remain with the client.

Partial restoration of a soundboard consists of eliminating cracks by inserting wedge-shaped shims through the full thickness of the board. Over time these shims may become more visible and more prominent. This, however, has no effect on the sound or functioning of the instrument. To eliminate this “cosmetic effect”, the soundboard would have to be replaced with a new one instead of the old one being restored.

Restoration of agraffes consists of unscrewing them, polishing them and refitting them to the cast-iron plate. SAP Renovation accepts no responsibility for future cracks or defects in the agraffes. This does not happen often, but we are obliged to inform our clients of it. These components can be covered by the warranty only if they are replaced with new ones.

NOTE: some old instruments have a type of agraffe that is no longer manufactured, and there is no alternative but to restore the old agraffes.

In a restoration that covers only the case of the instrument, SAP Renovation accepts no liability for changes in the condition of the soundboard, the pinblock or the bridges.

If woodworm is found in the instrument, we apply a procedure for eliminating it that has been proven over many years. There is nevertheless a risk that the pests will reappear, for which SAP Renovation accepts no responsibility.

The warranty does not cover occurrences of this kind.

Where the acoustic part is restored, not making new caps for the bass and treble bridges may lead to a loss of quality and tone colour while the instrument is in use.

Where the acoustic part is restored, not fitting a new pinblock may lead to unstable tuning while the instrument is in use.

Components of the instrument such as:

– hinges

– casters

– pedals

are covered by the manufacturer’s warranty. Complaints concerning defects in or the quality of these components are passed on to their suppliers. Complaints concerning correct fitting are dealt with by SAP Renovation.

Transport of the instrument to SAP Renovation for warranty work, and its return to the client, is arranged at the expense of SAP Renovation.

IMPORTANT: the instrument is collected and delivered only at ground-floor level with a paved driveway.

Where the instrument has to be carried up or down stairs, or moved over soft or difficult ground, the client is obliged to arrange this independently and at his or her own expense.

By commissioning us to restore your instrument, you accept our standards of workmanship and of the materials used.

Remember that we always approach each commission individually. If you have special wishes and would like a particular task carried out to your specification, tell us before we begin restoring your instrument.

Any questions?

Write to us — we will reply within 24 hours.